產品時間:2023-09-14
H-III防爆打滑開關使用條件及技術參數 Secon, conitions of use an technical parameters工作電壓: AC220V Voltage: AC220V環境溫度: -35ºC ~+60ºC Ambient temperature: -35 º C ~ +60 º C相對濕度: 不大于95
H-III防爆打滑開關|打滑監測器Ski etector
型號Moel:
H-Ⅲ ,H-II,H-I
類別Category:
打滑 Ski etector
H-III防爆打滑開關參數說明
湖北杭榮
H-III一年,
湖北杭榮打滑開關系列產品型號有:JH-H-I、JH-H-II、JH-H-III、JHQS-I、JHQS-II、
JHQS-III、H-I、H-II、H-III 、H-1、H-2、H-3、H-111、H-S,H-SA,XLH-111、
YHH-1、YHH-2、YHH-3、YHH-I、YHH-II、YHH-III、SJK-1、SJK-II,LQ-1,
KBJ-220Y,H-P-I,H-P-II,H-P-III
撕裂檢測儀 撕裂
YHL-2、ZL-A、ZL-B、ZL-1、ZL-2、YHZL-2、SL-A、SL-B、B-100、KBZL-220、
THZL-B-II、THZL-B-I、HFZL-L、THZL-A-II、THZL-A-I、KBZS1-12-T-TH
縱向撕裂,C-100,XT-FSL,HQCL-2010TPK,JSL2尾車縱撕裂開關,ZS1-G,
KBZS1,GYLS-I, YHZL,GV1200,GV300長方形外型縱向開關,
&miot;產品描述Prouct escription
湖北杭榮電氣帶式輸送機相關設備,有
型號 380v 220v 2A 3A 5A
HFKPT1-12-30、HFKPT1-20-35、HFKPT1-10-45、、XLPP-12-30、XLPP-11、
XLPP-III、XLPP-20-35、PK-12-30、PK-20-35、PK-10-45、KPT1-12-30、
KPT1-20-35、KPT1-12-35、KPT1-20-30、GHPK-12-30、GHPK-20-35、
GHPK-10-45、JHPK-12-30、JHPK-20-35、JHPK-10-45、GHLS-12-30、
GHLS-20-35、GHLS-10-45、
一、概述 Overview
H--Ⅲ型打滑用于檢測帶式運輸機在運行中的膠帶與主動滾筒之間的打滑,防止打滑所造成的惡性事故,該還可用于多條膠帶機聯鎖啟動和停機,速抱閘保護。
H - Ⅲ-ski etector use to etect belt in the operation of aircraft in the tape an take the initiative to rum between the ski an prevent skiing
cause by the vicious incient, the etector can also be use for a number of belt-chain start-up an shutown, Have low gate protection.
二、使用條件及技術參數 Secon, conitions of use an technical parameters
工作電壓: AC220V Voltage: AC220V
環境溫度: -35&orm;C ~+60&orm;C Ambient temperature: -35 &orm; C ~ +60 &orm; C
相對濕度: 不大于95% (25&orm;C時) Relative Humiity: not more than 95% (25 &orm; C)
: Protection levels:
工作位置: 帶式運輸機上膠帶下面。Work here: belt transport planes on the tape below.
在膠帶機起車或停機過程中應不投入或投入無效。In the tape machine from the car or parking in the
course of inputs or input shoul not be invali.
輸出接點數量: 一常開、一常閉一組轉換接點。Output contact: a normally open, normally
close contact a group of conversion.
觸點容量: AC380V 3A Contact capacity: AC380V 3A
動作方向: 雙向 Action irection: two-way
三、規格數據表 Thir, the ata sheet specifications
型號
Moel
打滑率(%)
(%)Moel ski rate
適用帶速(m/s)
(m/s)Applie with spee
觸輪直徑(mm)
(M / s) iameter roun contravene
重量
(公斤)
(Kg)
H&mash;Ⅲ
20-30
0.8-6
116
4
四、 工作原理 principle
H--Ⅲ型打滑工作時,通過膠帶帶動觸輪,使觸輪反應出膠帶的實際帶速,觸輪帶動內傳動軸,使產品內部繼電器工作,繼電器工作主要是由輪片切割光電信號,由內設固定數值與實際值產生對比數值從而產生通斷信號,
完成檢測帶速工作,如果膠帶速度與主滾筒速度不同步并下降到正常帶速的20-30%時,接點通斷信號發生變化,重新輸出一組信號給控制室,警示膠帶已處于嚴重打滑狀態。
H - Ⅲ-ski etector work, riven through the tape inconsistent roun, inconsistent roun of reaction to the actual tape with spee, touch etector roun lea in the rive shaft so that the proucts within the relay, the relay is
primarily the work Roun-cutting photoelectric signal
from the internal fixe numerical comparison with the actual numerical values resulting in on-off signal, complete with spee etection work, if the tape
spee an the spee is not the main rum an roppe to sync with the normal spee of 20-30% , The contact-off signal change, a group of re-exports signal to the control room, warning staff have been in a serious ski Belt state.
五、安裝與接線 installation an wiring
1、安裝 the installation
H-Ⅲ型打滑安裝時,可按下述要求并滿足現場使用條件安裝在帶式運輸機上膠帶的下面,安裝后應膠帶有料情況下使打滑與膠帶面平行,同時膠帶無料運轉時觸輪與膠帶面應接觸,且安裝位置在振動zui小和膠帶抖動zui小的地方。當采用輸出軸和從動滾筒軸連接檢測膠帶實際帶速的方法時,可按安裝示意圖并選用柔性連軸器以產品工作正常。體安裝詳見安裝示意圖: H-Ⅲ ski-etection evis, can meet the following requirements an conitions for the use of site-installe in the zone below the plane on the tape, after the installation shoul ensure that the tape is expecte uner the circumstans to ski etector surfa parallel with the tape, no tape Liu etector when running conflict with roun fa with the tape shoul be a relile contact, an the installation location guarantee that the minimum vibration an plastic jitter smallest plas. When a etector output shaft an the riven pulley shaft connecte with the actual tape spee etection metho, the iagram can be installe an even the optional flexible shaft is to ensure that the prouct is working. Sketch Show install specific installation:
2、使用與接線 an the use of wiring
使用單位在使用H-Ⅲ型打滑時只要將產品按安裝示意圖安裝在相應的位置上即可,我廠提供的產品均是按用戶訂貨時提出的要求制造的。由于理論上的帶速和實際膠帶運行速度有差異,用戶屆時可按我廠提供調整辦法適當?shù)恼{(diào)整以切實正常工作狀態,用戶接線時按接線示意圖正確接線即可。The use of units in the use of H-Ⅲ-ski etector, as long as the proucts will be installe by the installation iagram in the corresponing position can be, I plant the proucts are orere by customers at the request of the prouction. As a theoretical an practical tape spee with spee are ifferens, the user then I can ajust to Plant to provie the nessary ajustments to ensure the normal work for state, accoring to the user when the cle wiring iagram to the right wiring.
1紅線
2黃線
3蘭線
4
5
公共點
開點
閉點
電源AC220V
1.re line
2.yellow line
3blue line
4
5
Public point
A point
Close points
power AC220V
六、訂貨須知 orering Noti
1、在訂貨時請注明產品型號、名稱和數量。例如:H-Ⅲ型打滑10臺 in orer, please specify Moel, the name an number. For example: H-Ⅲ-10 ski etector
2、請說明膠帶機型號、帶寬、帶速和打滑率。please note tape machine moels, banwith, with rate of spee an slippery.
3、若用戶將打滑用于速保護和速抱閘檢測,使用時須將速抱閘額值和超數保護額定值注明以便調試。if you will ski etector for the protection of low-spee an low-spee testing have gates, shoul be use when the gates of low value an have superovulation protection rating to inicate ebugging.
買家必讀
收到貨時,無論包裝是否破損,務必當面檢查物品是否完好及缺少,有任何問題,立即與我取得。
本公司:誠信待人,我們是廠家,做的是生意,均以zui出廠家報價,沒有暴利。價位,。1年。
物流:順豐速運、申通遞、圓通遞、中通遞、天天運、EMS郵政速運及公鐵聯運。
購買需知:
本公司上傳產品型號規格有限,產品型號規格有多種,詳情請來電資詢。
湖北杭榮電氣有限公司為創造,提企業度,樹立企業形象,我們本著&lquo;一切追求,用戶滿意為宗旨&rquo;的精神,以&lquo;zui惠的、zui周到的、zui的產品&rquo;的原則向您鄭重:
產品:
1、 產品的制造和檢測均有記錄和檢測資料。
2、 對產品性能的檢測,我們誠請用戶親臨對產品進行全過程、全性能檢查,待產品被確認合格后再裝箱。
產品:
1、為了產品的性和性,杭榮的產品選材均選用或產品。
2、在同等競爭條件下,我公司在不以降產品技術性能、更改產品部件為代價的基礎上,真誠以zui惠的提供給貴方。
交貨期:
產品交貨期:一般常規格產品,款到,特殊產品需定制,按用戶來樣或圖片參數要求定制,若有特殊要求,需提前完工的,我公司可特別組織、安裝,力爭滿足用戶需求。
售前
一、 提供技術咨詢:我們會在zui的時間以內,根據您的需要為您提供任何技術及方面的咨詢及時對于您所關心的任何問題給予速回復等等。
二、提供考察接待:我們歡迎您隨時隨地蒞臨公司現場考察,并為您提供任何便利條件。
售中
一、 無論您是國外的客戶還是的客戶,無論您是我們的老客戶還是我們的新朋友,無論您的合同經額是大還是小,我們都將誠信、公平、熱情、嚴謹?shù)赝粚?duì)待;
二、 我們守時、保質、保量地嚴格執行合同規定的各項條款,并且為客戶提供的等。
售后
自購買之日起,杭榮銷售的產品非人為因素, 一年
方式:順豐速運、申通遞、圓通遞、中通遞、天天運、EMS郵政速運及公鐵聯運。
購買需知:
本公司上傳產品型號規格有限,產品型號規格有多種,詳情請來電資詢。
應用于各國的不同行業,包括汽車制造、電力、食品飲料、石油化工、冶金、、航空航天、機械、紡織、造紙、印刷、包裝、軌道交通、物流、水泥建材、造船、電線及電纜制造、采礦和市政等行業,成為深受用戶信賴的。
購買湖北杭榮產品請認準HANGRONG/杭榮商標,產品有,請注意購買杭榮,使用方便,。如有任何技術問題,請,您的寶貴意見,就是我們的進步,產品的!湖北杭榮力創*的,*的,為廣大客戶提供更的產品,的!請放心購買!
所有版權為湖北杭榮電氣有限公司
The buyer must rea
Upon reipt of the goos, whether the packaging amage, be sure to check whether the item is in goo conition an the lack of fa to fa, if you have any question, contact me immeiay.
The company promises: goo faith treats people, we are the manufacturer, o is wholesale business, with the lowest quotation, the manufacturers are not huge profits. Low pri, high quality. 1 year quality guarantee.
Logistics: suitle unant spee luck, shentong express elivery, yuantong express, zhongtong express, the aily express, EMS postal spee an national public rail transport.
Buy nee to know:
This company to uploa the prouct specifications is limite, there are many types of prouct specifications, for etails, please call avisory.
Hubei HangRong electric co., LT. To create a famous bran, improve enterprise well-knownness, the setting up enterprise image, we in line with \"all the pursuit of high quality, customer satisfaction as the tenet\" of spirit, with \"the most preferential pri, consierate servi, the most relile prouct quality\" the principle of commitment to you:
Prouct quality commitment:
1, prouct manufacturing an inspection are quality recors an information.
2, out the etection of prouct performan, we invite users to whole pross of prouct, the whole performan examination, to prouct elivery is confirme qualifie before packing.
Prouct pri promise:
1, in orer to ensure prouct high reliility an avan nature, HangRong proucts materials are use omestic or international bran proucts with high quality.
2, uner the conition of equal competition, our company are not to reu prouct technical performan, change the parts, on the basis of cost of sinrity to provie to you the most preferential pri.
elivery time commitment:
Proucts elivery time: general specification proucts, often just to eliver goos, special proucts nee to customize, customize accoring to customers samples or pictures parameters requirements, if you have special requirements, shoul be complete ahea of scheule, we can special prouction, installation, to meet user nees.
Pre-sale servi
A, provie technical avi: we will in the fastest time of less than, accoring to your nee to provie you with any professional an consulting on pris for any conrn to you in time to give quick response an so on.
Secon, provie inspection reption: we wme you to visit our company anytime an anywhere, an provie any convenien for you.
Sale servi
A, whether you are foreign customers an omestic customers, whether you are our ol customer or our new frien, regarless of your contract amount is large or small, we will be honesty, fairness, passion, rigorously the same treatment;
Two, we guarantee punctual, quality quality, strictly implement the terms an conitions stipulate in the contract, an provie customers with value servis, etc.
After-sales servi
Sin the ate of purchase, HangRong sales prouct non-artificial factors, one year warranty
Shipping metho: suitle unant spee luck, shentong express elivery, yuantong express, zhongtong express, the aily express, EMS postal spee an national public rail transport.
Buy nee to know:
This company to uploa the prouct specifications is limite, there are many types of prouct specifications, for etails, please call avisory.
Wiely use in many countries aroun the worl in ifferent inustries, incluing auto manufacturing, electric power, foo an beverage, petrochemical, metallurgy, tobacco, aerospa, machinery, textile, papermaking, printing, packaging, rail transportation, logistics, ment, builing materials, shipbuiling, wire an cle manufacturing, mining an municipal inustries, become the preferre bran truste by the user.
Hubei HangRong proucts purchasing, please look for the HANGRONG/HangRong traemarks, proucts are anti-counterfeiting mark, please note that for authentic HangRong, easy to use, relile in quality. If you have any technical problems, please inquire, your precious opinion, is the progress of our quality, prouct innovation! Hubei HangRong create the first-class quality, first-class bran, for the overwhelming majority of customers with more quality proucts, exllent servi! Please be assure that purchase!
All Copyrights for hubei HangRong electric co., LT
湖北杭榮廠區外景圖:
湖北杭榮電氣有限公司 網址:m.scyxlw.cn
地址:湖北省麻城市龍池工業區杭榮科技園 傳真:0713-2115868 技術支持:智能制造網 管理登陸 備案號:鄂ICP備15020148號-4 GoogleSitemap